DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with DO Supply's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Do Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Do Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Do Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Do Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Do Supply also makes no representations as to your right to install any such firmware on the product. Do Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Repair Service
check_circle_outline Available
We use our decades of industry experience to offer fast and reliable repair services for this product.
security Protected by a one year DO Supply Warranty.
person_search Inspected and repaired by experts.
verified Thoroughly tested for quality assurance.
| MPN | 2711C-F2M |
| Product Line | Panelview Component |
| Manufacturer | Allen Bradley |
The 2711C-F2M from Rockwell is an HMI terminal featured in the PanelView Component line. The device provides the user a 1.93 inches wide and 0.55 inches tall monochromatic transflective STN passive matrix screen that the operator may simply exploit through its function keys user interface.
travel_explore
We offer international delivery through FedEx, UPS, and DHL.
security
We are proud to offer a one-year DO Supply Warranty with all purchases.
payment
We are happy to accept payment through all major credit card providers.
The Rockwell 2711C-F2M is a panel for industry that is part of the PanelView Component series. The user could easily link other devices, like Programmable Logic Controllers, to the module using its Ethernet port. An essential factor to maintain the correct functioning of the operator terminal is ventilation. The operator shall provide sufficient room in the enclosure and acknowledge other systems in these considerations. The operator terminal should not withstand tremors above 2 g at 500 hertz. The terminal grants the utilization of a memory card to load programs. The maximum clash that this model may tolerate is 15 g in operating conditions and 30 g when the HMI is shut down. PanelView Component DesignStation is a programming environment that must be installed in order to write applications for the system. With this development environment the engineer will increase efficiency for terminal application development. This software is exploited to download the developed application to the device. This development environment runs on different Microsoft Windows systems. The heat dissipated by the 2711C-F2M should be around 4.7 watt. The ambient temperature around the system has to be between 0 and 50 degrees Celsius when the system is working and must be kept in the following range: -25… 70 degrees Celsius while the module is turned off. The 2711C-F2M has a 122 by 32 pixels monochromatic transflective STN passive matrix display. Any user shall exploit the panel using a set of function keys. A door to needs to always be arranged to make sure to be able perform maintenance, troubleshooting and wiring tasks.
Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the 2711C-F2M:
Manufacturers often create minor variants of products referred to as "series" or "revisions." In some cases, the revision or series of your equipment will not impact you. We are familiar and well-equipped to work with most variants of the 2711C-F2M.
Variants are often specified in an unclear manner, causing some confusion over how they should be written. Here are some of the variants of the 2711C-F2M that we are familiar with and several ways they may be written:
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.