DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with DO Supply's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Do Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Do Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Do Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Do Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Do Supply also makes no representations as to your right to install any such firmware on the product. Do Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Repair Service
check_circle_outline Available
We use our decades of industry experience to offer fast and reliable repair services for this product.
security Protected by a one year DO Supply Warranty.
person_search Inspected and repaired by experts.
verified Thoroughly tested for quality assurance.
| MPN | 2711-M3A19L1 |
| Product Line | Panelview 300 |
| Manufacturer | Allen Bradley |
The PanelView Standard 300 Micro series features the 2711-M3A19L1 operator panel with a 2.88 by 1.66 inches monochromatic LCD screen and a a RS-232 (DH-485) 8-pin mini DIN slot for communication with external devices.
travel_explore
We offer international delivery through FedEx, UPS, and DHL.
security
We are proud to offer a one-year DO Supply Warranty with all purchases.
payment
We are happy to accept payment through all major credit card providers.
In the PanelView 300 Micro terminals, the 2711-M3A19L1 features a monochrome transflective LCD screen, that can be used with a simple keypad interface that allow 4 different function keys that can be programmed within the application. This panel features a DH-485 port for communication and a RS-232 port only for printing. With a size of 73 by 42 millimeters and a resolution of 128 by 62 pixels, this panel is one of the smallest of the PanelView Standard series terminals. The user can develop and download applications to the terminal using PanelBuilder32 software. With its easy-to use and intuitive GUI, PanelBuilder will speed up development time and efficiency in many ways. Download on target is possible using a direct connection or a gateway. This panel does not allow the transfer of applications through an external memory card. The terminal will be established in an environment with IEC-1131-2 pollution degree 2 protection that means non-conductive aldulteration only could occur. In order to ensure successful maintenance and troubleshooting, the operator should provide the enclosure some access to the back of the terminal. The operator may find two LEDs on the back of the device: a green one to show communication feedback and a red one to show error and faults. The maximum vibration that the device can withstand is 2 g at 2000 hertz. The panel will work correctly if maintained at an height below 2000 meters (6561 feet). The panel maximum operating temperature is 55 degrees Celsius (131 degrees Fahrenheit) and the minimum temperature is 0 degree Celsius (32 degrees Fahrenheit).
Manufacturer Part Numbers (MPNs) are often difficult to read. Here are some commonly mistaken versions for the 2711-M3A19L1:
Manufacturers often create minor variants of products referred to as "series" or "revisions." In some cases, the revision or series of your equipment will not impact you. We are familiar and well-equipped to work with most variants of the 2711-M3A19L1.
Variants are often specified in an unclear manner, causing some confusion over how they should be written. Here are some of the variants of the 2711-M3A19L1 that we are familiar with and several ways they may be written:
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.
Need to repair one? Contact us.